@wlcommunityusers

Hi,

You can follow the tutorial below.

Link: https://youtu.be/gocp-6zWy00?si=2RnSB6yKGHgwz7O4

Best Regards.

@tom.pinto

Hi Tom, we are going to fix this visual problem in the next release.

Thank you for the bug-report.

Regards…

@gitodesign

A return was provided by mail.

Hi @stevediaz
Could you please check SOA datasource that WLSDM created? Is that datasource is active and working?

@traceyrawlings said in Log monitoring configurations are blocked:

Log monitoring are blocked but there are no files with .out0, or .log0
in the directory.

I see wlsdm.agent.DEServer1.log_.lck
and i see older log files wlsdm.agent.DEServer1.log
and i see older log files wlsdm.agent.DEServer1.log.1

Which files are we supposed to remove?

Hi,
These notifications are based on WLDF queries for your WebLogic server logs. If querying WebLogic logs through WLDF tooks long time, this notification visible to WebLogic administrators.
You need to check WebLogic logs not WLSDM logs. Keeping rotated WebLogic (*.out0, *.log0) logs cleaned and tidy would improve your WebLogic domain performance.

@salman said in Installation of WLSDM on Saperate Server:

We do not want to install WL-SDM on same server where Oracle Weblogic Is installed, is possible to install WLSDM on separate server?. It will be better not only w.r.t security prospective but also because monitoring Weblogic from outside the Weblogic server is more beneficial.

Hi,
WLSDM installation and montoring is very simple and works like native WebLogic console extension. If you want to monitor your domains from outside the WebLogic admin server we have another standalone solution which is WL-OPC ( https://wlsdm.com/wl-opc/ ) This product is the central WLSDM Operation Center product.
Hope this would help…

Hi @wlcommunityusers,

You can change your mail configuration by following the steps below.

Go to WLSDM > Configuration > WLSDM System Settings > mail.account

feb9c61c-3584-4463-9119-2be0f0637fc5-image.png

Go to WLSDM > Configuration > WLSDM System Settings > mail.to

a1fd66ec-f3c3-4fd8-ad9b-10b7373183cb-image.png

@hedmondjohn

Hi Hedmond,

You can complete the WLSDM wizard by applying the solution below for the error you receive.

Solution:

WebLogic AdminServer port use which is pointed in below screen capture.

7ca7a3fd-932d-4302-96a7-f9274116909c-image.png

• Go to AdminServer > Protocols > General and increase the “Maximum Message Size” to “100000000”.

776232d7-7fda-4e92-bf70-3a854e221fc2-image.png

• Then click the HTTP section and make sure “Max Post Size” is “-1”.

e05ee5a3-9dbd-4d8e-9e8d-97df6562668c-image.png

Finally, activate your changes, restart the AdminServer and try to complete WLSDM Installation Wizard again.

@jonatanrocha

@jonatanrocha said in Monitoramento via API:

Gostaria de receber sugestões de como configurar e integrar o monitoramento do weblogic via api no zabbix.

Hi,
Please post in English. We can use Google Translate for this but we are preferring you do it instead 🙂
Regards…

Hi Esnutd,

You can request evaluation license if you fill the below form correctly.

https://wlsdm.com/request-evaluation-key

@ctuncel said in WLDSM Server resource dashboard:

Merhaba
OPC üzerindeki dashboard’larda, sunucuların fiziksel kaynaklarının güncel statülerini ve sağlık durumlarını görebilmek için zengileştirilmesi diğer monitoring uygulamaları ile hibrit kullanımın önüne geçerek, tek ekrandan sağlık durum takibinin yapılabilmesini sağlayacaktır.
Fiziksel sunucunun cpu, memory, swap, disk iops, nw I/O gibi kaynakların durumu host bazında izlenebilmeli, bunlar liste yada grafik şeklinde gruplanabilmesi MW yöneticileri için ilk arıza teşhisi için hızlandırıcı olacaktır.

Merhaba Cemal Bey,

OPC genel anlamda verinin tutulduğu değil de gelen alarmların ve canlı health’in tutulduğu uygulama olarak konumlandırmıştık. Fakat versiyon 2.0 ile beraber bu durumu değiştirme kararı aldık. Yeni versiyon’da veritabanı olarak MySQL ve Oracle DB seçenekleri ile daha fazla veriyi tutma imkanımız olacak.

Bu doğrultuda sunucu kaynakları için de last snapshot şeklinde bir dashboard’imiz olacak.

Öneri ve ilginiz için teşekkürler. Preview buraya ekliyor olacağız.

Bilgilerinize…

Hi @sergei

Thank you for reaching out to us. Yes, WLSDM is totally free and almost fully featured for the developers. And it is called developer edition.

Could you please check your domain again and let me know is “Change Center” section is available or not? Please take below screen capture as reference.

fdf2d6f6-503b-4b58-a971-8948614095c6-image.png

If it is available on your domain; it is still production mode and you can not use free developer edition. Please check your domain and let us know the result?

Also, you still want a license you can contribute to us and win a free enterprise license; please follow this page for the submission: https://wlsdm.com/get-free-enterprise-license

Fevzi Korkutata

@can-sahin-wlsdmteam

Hi,

Could you try to add below parameter in AdminServer JAVA_OPTIONS please?

This parameter is purging WLSDM DB every AdminServer startup. Try this then let us know the result.

-Dwlsdm.system.dbShrinkOnStartup=true

Kind Regards.
WLSDM Support
http://www.wlsdm.com

@can-sahin-wlsdmteam

Hi,

You can disable alarms and monitoring of shutdown servers as below.

d6a701da-73c5-4994-945f-aecdca7489e6-image.png

Kind Regards,

WLSDM Support Team
https://community.wlsdm.com

@wlcommunityusers said in WLSDM Config- New managed server:

Hi,

We have added a new managed server to the domain. We want to configure alerts(Datasource, Backend Monitoring etc) like we configured for previous managed server. Please suggest.

Current config:
AdminServer
ManegedServer1
ManegedServer2

Regards.

Hi,

You can include new server to current configurations in “Response Time” monitoring but you need to add new back-end systems configuration for new server.

Please check below screen captures.

Response times configuration for newServer:

Go to “Configurations > Monitoring & Diagnostics” in WLSDM menu Follow below navigation and click “edit” button Select ManegedServer2 then save

reponse1.jpg

response2.jpg

Backend configuration for newServer:

Go to “Configurations > Monitoring & Diagnostics” in WLSDM menu Follow below navigation; click “page operations” button then select “New Back-end Systems Monitoring” Create new back-end configurations, add events ManegedServer2 then save

backend1.jpg

backend2.jpg

Kind Regards.

WLSDM Support
http://www.wlsdm.com

Hi,

We have resolved the DB purge issue in version 3.9.2. Which version is this WLSDM domain?

You have two options;

First is to upgrade WLSDM v3.9.2. (Keep in mind while you are opening the AdminServer; the purge operation would start automatically and it can took a lot time because of your db size)
https://wlsdm.com/docs/README#IX.Upgrade&Reinstall&Uninstall

Second is fresh re-installation which is explained as below steps. (Remember to take current configurations; if you have license issue we have already sent the trial license to skip config wizard)

Export WLSDM Configuration; follow the steps below

wlsdm_configuration.jpg

Shutdown AdminServer Delete WLSDM Runtime Folder (If background information is not important; in this case the past will delete) AdminServer start Complete WLSDM configuration wizard by importing export configurations

wizard_configuration.jpg

Re-installation procedure also available in here :
https://wlsdm.com/docs/README#IX.Upgrade&Reinstall&Uninstall

Kind Regards.

WLSDM Support
http://www.wlsdm.com

@wlcommunityusers said in Custom log monitoring and other log/text file management on WLSDM:

Requester: @bibarrav

Hi guys!,
Is possible to have a CUSTOM LOGs or something like that to monitor various logs files generated dinamically on some folder in the Web Logic Server? In some cases we use these kind of files to register detailed transaction procesing to have a better understanding of application test cases under the hook, obviouslly in a DevTest Env.
Great work BTW!!
Regards

Hi Bibarraw,

Thank you for your supportive comments. Custom log monitoring and every kind of log/text file management is available on WLSDM. Please check below documents and tech blog posts;

Click here to go “file explorer” and “log viewer” medium post

@wlcommunityusers said in WLSDM dasboard restriction for read only mode:

Requester: @jorfergo

Hello. We are were interesting in have a “public” dashboard, where we can custom the metric to insert, and do only accesible this dashboard for other public (operators, management, etc). It will be needed that this dasboard only be accesible in read only mode, to block modifications/actions by the consumers.
Regards
Jorge

Hi Jorge,
We are working on your issue. We have one last question;
How about login? Are these public dashboards should be restricted with logged in or not according to your requirement?
Regards…

@wlcommunityusers said in WLSDM could show the composites list for SOA domain?:

Hi All,
I believe that it will be very useful if WLSDM could show the composites for SOA domains which became failed after restart the managed servers.
Thanks

Hi Ozhan,
We have a “Composite List” page and maybe we can track the status of Composites periodically. It is a good case to monitor failed SOA composites.

We have another option after v3.2.2 which is the scheduler. Maybe setting up a scheduled job can do this. We’ll be working on it and let you know with a technical reply.
Regards…

@wlcommunityusers said in Export WLSDM dashboards to another weblogic domain:

Requester: @vanrussell_nl
We have created our own custom WebLogic dashboards on WLSDM console; is it possible to export these WLSDM dashboards to another weblogic domain? This feature would be very helpful to us; because we setup WLSDM usually in our operations.

Hi, Thank you.

We will have an export feature on the next official release. Will try to add export custom dashboards for WebLogic monitoring.
Regards…

@wlcommunityusers said in WLSDM WebLogic .out and .log monitoring & generate notifications:

@vanrussell_nl

Hi,
Is there any plan to support WebLogic out logs monitoring? It would be great if we have the options to monitor WebLogic out logs and generate notifications

As we discussed before, you can redirect OUT logs to the WebLogic server logs then you can monitor OUT and ERR logs.

On the other hands; we have implemented the CUSTOM LOG MONITORING feature for the next release. It’s possible to monitor every kind of log file on the Oracle WebLogic application server.

@wlcommunityusers

Hi,

Please follow screenshot’s steps and set the threshold as below.
–> WLSDM Dashboard Menu > Monitoring & Diagnostics > Back-end Systems tab

fileread2.jpg

fileread3.jpg

Kind Regards…

WLSDM Support
https://community.wlsdm.com

@wlcommunityusers said in Daily OSB reports for ProxyService performance:

Requester: @vanrussell_nl

Hi, We’re using WLSDM OSB Module v.2.3.1. When the official OSB module will release? Is it possible to see OSB Daily reports just as SOA module?

We are going to release new 2.5.2 version three weeks later. In this version, WLSDM-OSB Module will be released officially.
It will covers Oracle Service Bus (OSB) Daily Reports just as you mentioned. You’re going to able to get daily OSB reports for ProxyService performance and availability. FYI.

@wlcommunityusers said in Create custom back-end (JDBC, EJB, Webservice… Etc.) dashboard:

Requester: @tom-pinto

Just as JMX metric dashboards; is it possible to create custom back-end (JDBC, EJB, Webservice… Etc.) dashboard? It would be great to add this feature…

We’re currently working on this and it will be possible to create unlimited back-end dashboards. Another good news: Additional back-end EVENTs are coming 😊 Especially wait for Socket R/W charts…

Hi,

Did you upgrade the domain? Your latest screenshot says your WLSDM v3.7.2 but WL-OPC says WLSDM v3.9.2.

You can follow the below provided solution.

Check two way access between WL-OPC and WLSDM
WLSDMHostname$ telnet OPCHostname 8080
WL-OPCHostname$ telnet WLSDMHostname 7001 Open problematic domain’s wlsdm_agent.jar with winrar and check WLSDM-version in “META-INF> MANIFEST.MF” file. If there is old version just replace wlsdm_agent.jar with the new version in $DOMAIN_HOME\wlsdm_agent\ Unregister problematic WLSDM domain from WL-OPC Complete WLSDM installation wizard without WL-OPC registration Register WLSDM domain to WL-OPC in WL-OPC “Administration> WL Domain” page. If the problem is not resolved please send us $WL-OPC_HOME\bin\WLOPC\logs with the zip file

Kind regards.

Hi,

Could you check JVM Parameters for WLSDM? You can take the below page as a reference.

https://wlsdm.com/docs/README#VI.Installation

JVM Parameters for backend configurations:

jvmparameter.jpg

Kind Regards.

Hi,

SOA default dashboards are contains complete SOA monitoring and they are sufficient for monitoring SOA performance.

You can check https://medium.com/wlsdmforweblogic WLSDM Medium blog posts by WLSDM team and customer experiences.

You create new Devops MBean and new Dashbaord in WLSDM as below screnshots.

Also please check suggested blog posts:

https://medium.com/wlsdmforweblogic/how-to-create-server-machine-disk-usage-dashboard-and-trigger-delete-logs-devops-action-a267f439c68
https://medium.com/wlsdmforweblogic/how-to-create-a-custom-mbean-from-an-sql-query-in-weblogic-server-using-wlsdm-generic-devops-b978acb22401
https://medium.com/wlsdmforweblogic/advanced-weblogic-monitoring-develop-jmx-mbeans-and-automate-with-wlsdm-metric-actions-73580ca73782

• How to create new DevOps MBean in WLSDM

genericdevopsmbean.jpg

• How to create custom dashboard and create

create.jpg

Regards.

Hi,

You can change the JFR repository directory using the following JVM option:
WLSDM must delete those temp files which is older than two days (48 hours).

-XX:FlightRecorderOptions=repository=WLSDM/temp/JFR ( see: https://wlsdm.com/docs/#VI.Installation )

If you choose not to define (or remove) this JVM option, by default the files will be stored under the operating system temporary directory.

For more information see: https://docs.oracle.com/javase/8/docs/technotes/tools/unix/java.html
repository.png

Also, jfr files are static profiling files, not library files. You can delete them safely even runtime.

For the second question: You can achieve that using the “Downtime” feature:

1 – Go to WLSDM console / “Monitoring & Diagnostics” page.

schedule.png

2 – Open the page operations and click the “New Scheduled Job / Downtime”
newschedule.png

3 – Configure the downtime and click save.

At this point, you have two action option:
1 – Stop all notifications but keep monitoring
2 – Stop all monitoring

action.png

scheduletime.png

Regards.

Hi Can,

This error is the wrong path for java in setenv.properties file configuration.
Because in Linux alternative link using for java path.
If you are using this command in terminal. “echo $JAVA_HOME” then it gives a true java path.
ex: echo $JAVA_HOME --> /usr/lib/java/jdk1.8.0_201
In setenv.properties file JAVA_HOME line change with your full java path.

Then you can start WL-OPC.

Regards.

Hi,

It looks like SMTP Server that you are using requires authentication.
535 Authentication required com.sun.mail.smtp.SMTPSendFailedException: 535 Authentication required

Please make sure the SMTP username and password are set on the WLSDM.

smtp1.png

After that, you can check the setting by using the “Test Email Settings” button under the page operations dropdown menu.

smtp2.png

smtp3.png

smtp4.png

Regards.